 |
Standard Construction
- Angle Iron Frame in all Models except 222
- Insulated Sides, Top, & Rear (8#/Ft3 Mineral Wool)
- 14-16 gauge Cold Rolled Steel Exterior
- 16 gauge Aluminized Steel Interior
- 16 gauge Aluminized Steel Airflow Ducts
- Explosion Relief Door Latches or Hatches
- Lifting Eyes and Mounting Brackets Standard
- Gray Enamel Exterior Finish on Zinc Rich Primer
Standard Controls
- U.L. Listed Control Panel & Components
- LED PID Temperature Control
- 99 Hour Digital Timer with Interlock on Blowers
- Air Circulation & Exhaust Purge Timer
- Door Switch for Heat and Blower Cutoff
- Back Up High Limit & Deviation Control
- Air Pressure Proving Switches for Blower Failure
- Forced Exhaust for Removal of Solvent Vapor
- Standard Service 208,240, 460 & 480 Volt (3 Ph / 60Hz)
- Main Line Circuit Breaker is Included
Technical Notes
- Dimensions are Noted Width, Height & Depth
- Interior Dimensions Clear Between Walls, Floor & Top
- Exterior Dimensions include all Controls & Hardware
- When Sizing your Oven Needs, Allow at Least 6" on All Sides for Airflow
- All Specifications are subject to Change without Notice. Contact the Factory for Latest Changes
- All Ovens Operate from a 120 Volt Control Transformer which is Included
- Exhaust Stack is not Included and Must be Secured from a Local Source
|
